Skip to content
EEL 3123 Linear Circuits II Lab Manual
  • Introduction
    • Safety Rules & Operating Procedures
    • Laboratory Safety Information
    • Troubleshooting Hints
  • Experiments
    • #1: DC Measurements
    • #2: Circuit Analysis Techniques
    • #3: AC Measurements
    • #4: First and Second Order Circuits
  • Projects
    • Project #1 Thevenin’s Theorem
    • Project #2 Circuit Design #1
      • Circuit Design Part A
      • Circuit Design Part B
      • Circuit Design Part C
    • Project #3 AC Load Measurement
    • Project #4 Circuit Element Identification
    • Project #5 Circuit Design #2
  • Appendix
    • I. Lab Component
    • II. List of Available Resistors & Capacitors
    • III. Standard Resistor Color Code

Circuit Design Part C

In this 3rd part, you are required to use both Circuit A and Circuit B you have designed in Circuit Design Part A. In addition, you are also required to achieve certain design requirements while satisfying certain design constraints, both of which are detailed in Table 3. To achieve the design requirements, you may need to design additional circuit(s) and cascade them with Circuit A and Circuit B appropriately, as shown in Figure 3.

Figure 3 Circuit Design Part C
Design Requirement and Design Constraint

Table 3     Design Requirement and Design Constraint

Lab SectionDesign Specification
EEL 3123C-11Project A
EEL 3123C-12Project B
EEL 3123C-13Project E
EEL 3123C-14Project D
EEL 3123C-15Project C
EEL 3123C-16Project F

Table of Contents

  • Introduction
    • Safety Rules & Operating Procedures
    • Laboratory Safety Information
    • Troubleshooting Hints
  • Experiments
    • #1: DC Measurements
    • #2: Circuit Analysis Techniques
    • #3: AC Measurements
    • #4: First and Second Order Circuits
  • Projects
    • Project #1 Thevenin’s Theorem
    • Project #2 Circuit Design #1
    • Circuit Design Part A
    • Circuit Design Part B
    • Circuit Design Part C
    • Project #3 AC Load Measurement
    • Project #4 Circuit Element Identification
    • Project #5 Circuit Design #2
  • Appendix
    • I. Lab Component
    • II. List of Available Resistors & Capacitors
    • III. Standard Resistor Color Code

About

Lab Manual Authors:
Dr. Parveen Wahid
Ms. Ya Shen
Dr. Chung Yong Chan

Project Assistant Producers:
Ethan Partidas
Mena Mishriky                                              Ethan Fluhr                                            Isaiah McCarty

Webmasters:
Brandon Cuevas
Garett Goodale

For questions and revision requests, please contact Chung Yong Chan at chungyong.chan@ucf.edu.

Revised March 2023

Theme by Colorlib Powered by WordPress